View HBS150YG-A_195780.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

(888) IPD-CONVerters q (888) 473-2668
q
www.ipdconverters.com
HBS SERIES - 150 WATT
DESCRIPTION FEATURES * * * * Water Washable "True-Trim" Option 1500V Isolation Positive Or Negative Logic HBS single output DC/DC converters provide up to * Industry Standard Half150 Watts of output power in an industry standard, Brick half-brick package and footprint. These units feature * Open-Frame Packaging excellent efficiency, Class A conducted noise specs, and * 100C Baseplate Operation fixed switching frequency. The HBS features open-frame packaging, along with planar magnetics to provide maximum useable power with minimal thermal constraints. The HBS is especially suited to telecom, networking, and industrial applications, and is fully compatible with production board washing processes.
TECHNICAL SPECIFICATIONS
Input Voltage Range 48 VDC Nominal Reflected Ripple Input Reverse Voltage Protection Output Setpoint Accuracy Line Regulation Vin Min. - Vin Max., Iout Rated Load Regulation Iout Min. - Iout Max., Vin Nom. Remote Sense Headroom Minimum Output Current Dynamic Regulation, Loadstep Pk Deviation Settling Time Voltage Trim Range Short Circuit / Overcurrent Protection Current Limit Threshold Range, % of Iout Rated OVP Trip Range OVP General Turn-On Time Remote Shutdown Remote Shutdown Reference Switching Frequency Isolation, Input - Output Isolation, Input - Case Isolation, Output - Case Temperature Coefficient Case Temperature Operating Range Storage Range Thermal Shutdown Range Vibration, 3 Axes, 5 Min Each MTBF (Bellcore TR-NWT-000332) Safety Weight (approx.) 10 ms Positive Or Negative Logic Vin Negative 500 kHz 1500 VDC 1050 VDC 500 VDC 0.2%/C -40 To +100C -40 To +125C 105 To 115C 5 g, 10 - 55 Hz 2.1 x 106 hrs UL, CUL, VDE 2.5 oz 1% 0.2% V out 0.2% V out 0.5 VDC 10 %, Iout Rated 25% Iout 4% Vout 500 s 10% Hiccup 110 - 140% 115 - 140% Vout Nom. Hiccup
88 86 84 EFFICIENCY % 82 80 78 76 74 72 70 10 20 30 40 50 60 70 80 90 100 LOAD %
34 - 75 VDC 25 mA Shunt Diode Efficiency vs. Load (48V Input)
HBS150ZG-A
EFF. (34V) EFF. (48V) EFF. (75V)
Notes
MTBF predictions may vary slightly from model to model.
Specifications typically at 25C, normal line, and full load, unless otherwise stated. Soldering Conditions: I/O pins, 260C, ten seconds; fully compatible with commercial wave-soldering equipment. Units are water-washable and fully compatible with commercial spray or immersion post wave-solder washing equipment.
1
HBS SERIES - 150 WATT
MODELS - (See the last page of this file for options.)
Vin (Volts) 24 24 24 48 48 48 Vin Range (Volts) 18 - 36 18 - 36 18 - 36 34 - 75 34 - 75 34 - 75 Iin Max.* (Amps) 11.70 10.50 10.50 5.84 5.20 5.20 Vout (Volts) 5 12 15 5 12 15 Iout Rated (Amps) 30.00 12.50 10.00 30.00 12.50 10.00 Ripple & Noise Pk-Pk (mV) 100 150 150 100 150 150 Efficiency Typ. ** 80% 85% 80% 83% 86% 84% Model HBS150YG-A HBS150YH-A HBS150YJ-A HBS150ZG-A HBS150ZH-A HBS150ZJ-A
Denotes advanced product release. Consult factory for product availability. * Maximum input current at minimum input voltage, maximum rated output power. ** At nominal Vin, rated output.
MECHANICAL DRAWING
2.28" (57.9mm) MOUNTING INSERTS M3X.5 THROUGH 4PL
0.18" (4.6mm)
1
5
1.400"(35.6mm)
2 2.40" (61.0mm) 3 BOTTOM VIEW
6
1.000"(25.4mm)
DIA 0.080" (2.0mm)
7
0.700"(17.8mm) 0.400"(10.2mm)
8
4
9
0
DIA 0.040" (1.0mm)
-0.50"(-12.7mm) 1.900" (48.3mm) -0.19" (-4.8mm) 0 0.025" REF. (0.6mm) 0.50" (12.7mm)
HBS
Thermal Impedance Natural Convection 100 LFM 200 LFM 300 LFM 400 LFM 3.4 2.7 2.2 1.8 1.6 C/W C/W C/W C/W C/W
Pin 1 2 3 4 5 6 7 8 9
Function -Vin Case On/Off +Vin -V out -Sense Trim +Sense +V out
Tolerances Inches: .XX 0.020 .XXX 0.010 Pin: 0.002 (Millimeters) .X 0.5 .XX 0.25 0.05
Note: Thermal impedance data is dependent on many environmental factors. The exact thermal performance should be validated for specific application.
(Dimensions as listed unless otherwise specified.)
2
OPTIONS
When ordering equipment options, use the following suffix information. Select the option(s) that you prefer and add them to the model number. Example ordering options are located below the options table.
OPTION Negative Logic Lucent Compatible Trim Terminal Strip Trim Enable Trim and Enable Current Share Headerless SUFFIX N T TS 1 2 3 4 Y APPLICABLE SERIES HAS, HBD, HBS, HES, LES, QBS, QES, TES, TQD HAS, HBD, HBS, HES, QBS, QES XWS, XWD, XWT IAS, LES IAD, IAS, LES, SMS IAS, LES SMS Encapsulated EWS, IWS, OWS REMARKS TTL "Low" Turns Module ON TTL "High" Turns Module OFF
PIN LENGTH AND HEATSINK OPTIONS 0.110" (2.8mm) Pin Length 0.150" (3.8mm) Pin Length 0.24" (6.1mm) Horizontal Heatsink 0.24" (6.1mm) Vertical Heatsink 0.45" (11.4mm) Horizontal Heatsink 0.45" (11.4mm) Vertical Heatsink 0.95" (24.1mm) Horizontal Heatsink 0.95" (24.1mm) Vertical Heatsink 8 9 1H 1V 2H 2V 3H 3V All Units (Except SMS) All Units (Except SMS) All Units (Except DIP, SIP, and SM Packages) All Units (Except DIP, SIP, and SM Packages) All Units (Except DIP, SIP, and SM Packages) All Units (Except DIP, SIP, and SM Packages) All Units (Except DIP, SIP, and SM Packages) All Units (Except DIP, SIP, and SM Packages)
Standard Pin Length is 0.180" (4.6mm)
Includes Thermal Pad Includes Thermal Pad Includes Thermal Pad Includes Thermal Pad Includes Thermal Pad Includes Thermal Pad
Example Options:HBS050ZG-ANT3V = HBS050ZG-A with negative logic, Lucent compatible trim, and 0.95" vertical heatsink. LES015YJ-3N = LES015YJ with optional trim and enable, negative logic. QBS066ZG-AT8 = QBS066ZG-A with Lucent compatible trim and 0.110" pin length.
NUCLEAR AND MEDICAL APPLICATIONS Power-One products are not authorized for use as critical components in life support systems,
equipment used in hazardous environments, or nuclear control systems without the express written consent of the President of Power-One, Inc.
TECHNICAL REVISIONS The appearance of products, including safety agency certifications pictured on labels, may change depending on the
date manufactured. Specifications are subject to change without notice.
3

▲Up To Search▲

Price & Availability of HBS150YG-A

	To Download HBS150YG-A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .